FortiGate 80F
Bypass, DSL and LTE variants with dual power inputs — the resilient branch box
- Threat protection
- 900 Mbps
- Firewall throughput
- 10 Gbps
- IPsec VPN
- 6.5 Gbps
- Concurrent sessions
- 1.5 Million
Front panel
- RJ45 copper
The 80F is the entry-level model built for sites that cannot go down. It carries a single power supply with dual inputs, offers a hardware bypass variant so traffic keeps flowing through a failed unit, and supports 2,500 client-to-gateway IPsec tunnels — five times the 70F.
Chosen for its variants rather than its throughput, which at 900 Mbps threat protection is only marginally above the 70F. Take it where you need hardware bypass, dual power feeds, DSL, or a large number of client VPN tunnels terminated at the branch. For raw performance at similar money the 90G is a considerably faster box.
Highlights
- Dual power inputs on a single supply — survives one feed failing
- Hardware bypass variant keeps the link up through a device failure
- 2,500 client-to-gateway IPsec tunnels
- WiFi, 3G4G, DSL, bypass and storage variants
Typical deployments
- Branches with two power feeds or a UPS on one circuit only
- Inline deployments where a failed firewall must not break the path
- Sites terminating many individual client VPN connections locally
The numbers, with their conditions
Every figure below is Fortinet's own, with the test conditions it was measured under.
Performance
Fortinet's published figures. Firewall throughput is measured on UDP with no inspection enabled — size your deployment on threat protection throughput instead, which is measured with firewall, IPS, application control and malware protection all running against an enterprise traffic mix.
| Firewall throughput (1518 / 512 / 64 byte UDP) | 10 / 10 / 7 Gbps |
|---|---|
| IPsec VPN throughput (512 byte)IPsec VPN performance test uses AES256-SHA256. | 6.5 Gbps |
| IPS throughput (enterprise mix)IPS, application control, NGFW and threat protection are measured with logging enabled. | 1.4 Gbps |
| NGFW throughput (enterprise mix)NGFW performance is measured with firewall, IPS and application control enabled, enterprise mix traffic. | 1 Gbps |
| Threat protection throughput (enterprise mix)Threat protection performance is measured with firewall, IPS, application control and malware protection enabled, enterprise mix traffic. | 900 Mbps |
| SSL inspection throughput (IPS, avg. HTTPS)SSL inspection performance values use an average of HTTPS sessions of different cipher suites. | 715 Mbps |
| Application control throughput (HTTP 64K) | 1.8 Gbps |
| Firewall latency | 3.23 µs |
Capacity
| Concurrent sessions | 1.5 Million |
|---|---|
| New sessions / second | 45,000 |
| Firewall policies | 5,000 |
| Max gateway-to-gateway IPsec tunnels | 200 |
| Max client-to-gateway IPsec tunnels | 2,500 |
| SSL VPN throughput | 950 Mbps |
| Concurrent SSL VPN users (recommended max, tunnel mode) | 200 |
| Virtual domains (default / max) | 10 / 10 |
Security Fabric capacity
How much of the rest of the Fabric this model manages directly, with no separate controller.
| Max managed FortiAPs (total / tunnel) | 96 / 48 |
|---|---|
| Max managed FortiSwitches | 24 |
| Max FortiTokens | 500 |
Hardware
| Interfaces | 8x GE RJ45, 2x shared port pairs |
|---|---|
| Local storage | 128 GB (81F) |
| Power supplies | Single AC PS, dual inputs |
| Form factor | Desktop |
| Variants | WiFi, 3G4G, DSL, Bypass, Storage |
Sources
- Fortinet Product Matrix — FortiGate Network Security Platform (July 2026) — retrieved 2026-09-01
Reproduced from Fortinet published documentation and subject to change without notice. Where a figure is load-bearing for your design, ask us to confirm it in writing before you order — we will.
Buyers also compare
FortiGate 90G
28 Gbps firewall and 25 Gbps IPsec in a desktop chassis — the top of entry-level
FortiGate 70G
Line-rate 10 Gbps firewall with 1.4 Gbps SSL inspection — the entry-level value pick
FortiGate 120G
First rack-mount model — 1 RU, dual PSUs, 10GE SFP+ and 26 ports